If you are upgrading your existing FPV drone, and don’t want to invest in a new frame, check on “” and see if there are custom designs for your frame that you can 3D print. Here is a list of frames made for the DJI Air Unit. Usually it comes with 3D printed parts to fit the Air Unit and Antenna. If you are building a drone from scratch with the DJI FPV system, it’s best to get a frame that is designed for the DJI Air Unit. Repeat these steps for the Air Unit (and remote controller). You will have to activate each component separately, but the steps are the same.
#Image out of focus in fpv goggles for flight simulator on mac install#
Note that it could take a minute or two for the computer to install the driver when you connect it for the first time.Ĭlick the icon, and you will be prompted to activate your device. If you don’t see it, reconnect the USB cable. You should see the “DJI FPV goggles” icon.
Launch DJI Assistant 2 and login with your DJI account (Sign up if you haven’t already). Power on the DJI FPV Goggles first before connecting it to your computer via the provided USB-C cable. Make sure you download the FPV version of DJI Assistant! The wrong version will not detect your FPV goggles and Air Unit. Visit, click Downloads, Under Software, download the latest version of DJI Assistant 2. If you want to record video in goggles, you need to insert a Micro SD card ( what SD card do I need?).Put on the goggles, and adjust IPD sliders at the bottom to ensure clear view.Power on the goggles with a 3S or 4S LiPo battery using the provided cable (I am using a 4S 1500mAh LiPo for my drone).Install the four stub antennas, make sure they are well tightened.
0 kommentar(er)
